We assume you already have a broadband connection to the Internet (if you don't, you'll need to set one up). Also, keep in mind that most new laptops come with wireless network adapters, so check yours before making your shopping list.
Setting Up Your Network Hardware
Know Your Wireless Security
- Check that your cable or DSL modem is installed correctly.
- Install the wireless network adapters (if needed) in each computer as instructed by the manufacturer.
- Install the wireless router by connecting your cable or DSL modem to the WAN (wide area network) port of your router. If you leave one of your computers "wired," you can connect its ethernet cable to one of the router's other ports. If you have multiple floors in your home or office, we recommend putting the router on the middle floor for maximum signal strength. Keep in mind, though, that if you choose to keep one of your computers wired, you need to keep the router near that computer.
- Turn on the router and wait for its diagnostic lights to remain stable.
- To test connectivity, open a browser window on one of your systems and enter the router's default IP address (provided in its documentation). If you've configured everything correctly, you should end up at your router's configuration screen.
This wizard also helps you secure your network so no one else can gain access to the private intelligence on your systems. Below are available security features to implement.
Configure Your Network on Microsoft Windows:
- SSID (Service Set Identifier)
All wireless devices in your network must specify a password or SSID. We strongly recommend a unique, obscure combination of letters and numbers that you can recall easily as your password.
- WEP Security (Wired Equivalent Privacy)
A security protocol for wireless networks designed to provide the same security as a wired network, WEP encrypts data as it's transmitted radio waves.
- WPA Security (Wireless Protected Access)
This is a security protocol designed with stronger data encryption and user authentication more then its predecessor WEP.
Transfer Your Settings to the Router
- Click the Start button and choose All Programs -> Accessories -> Communications -> Wireless Network Setup Wizard.
- On the wizard's first screen, click Next.
- In the Network Name (SSID) text box, type a unique name for your network. Be sure to use a combination of letters and numbers. Make sure you give your network a name you'll remember, but one that others can't guess.
- Create a Network Name
- Select the Automatically Assign a Network Key (Recommended) so that Windows assigns a secure key of random letters and numbers to your network.
- To assign WPA encryption rather than the default WEP encryption, select the "Use WPA Encryption." However, before you select this option, check your wireless devices' documentation to ensure they work with WPA.
- Click Next to advance to the wizard's next screen.
The next series of wizard screens helps you transfer your wireless network settings to the other computers and devices in your network. You can also configure your wireless network without a Flash drive by entering security values generated by the Wireless Network Setup Wizard into the other systems in your network and your router.
Transfer Your Settings to Other Computers
- Select Use a USB Flash Drive (Recommended) to use your Flash drive and click Next.
- Setup Wireless Network
- Insert your Flash drive into your computer's USB port, as shown below. Its drive letter appears in the Flash drive drop-down list along the bottom of the wizard window. The wizard then writes the wireless network settings as XML files on the Flash drive.
- Save wireless settings to flash drive
- Follow the wizard's on-screen directions and plug your Flash drive into the router. The router's lights will blink three times to indicate it has configured itself with the wireless network settings stored on the Flash drive.
- Transfer wireless settings
Finish the Network Setup
- Plug your Flash drive into each of the other computers in your wireless network. The Status light on each computer's wireless adapter will blink three times to indicate that the system has accepted the network settings.
- When asked if you want to join the wireless network, click Accept. Your computers are now connected to your wireless network.
Click Finish to exit the Wireless Network Setup Wizard.
- Plug the Flash drive back into the computer on which you're running the Wireless Network Setup Wizard.
- Click Next in the wizard screen.
- On the wizard's final screen, you'll see a list of the wireless computers and devices you've successfully configured. To remove the network settings from your Flash drive, select the For Security Reasons, Remove the Network Settings from My Flash Drive check box. If you expect to use your Flash drive to configure additional wireless computers or devices in the future, leave this check box deselected.
We recommend that you setup encryption on your wireless router
by using a network's strong key (WEP or WPA) every so often to keep out potential hackers. Simply run the wizard and it assigns a new set of strong keys automatically.